
A faucet that drips, leaks or will not shut off
Repaired where a repair is honest. Replaced, with the valve under it, where the faucet is done.
Four things a faucet call turns out to be
Where the water appears decides whether this is a part or a replacement. That is the first thing we look at.
Drip, leak or low flow at a faucet?
Five questions that separate a ten minute repair from a faucet that is done.
Faucet Check
About 60 secondsWhat is the faucet doing?
A slow drip is usually a worn cartridge or washer. A leak at the base or under the sink is a different job.
How old is the faucet?
Cartridges and seals wear out on a schedule. An old faucet is often cheaper to replace than to rebuild.
Does the shutoff valve under the sink turn and stop the water?
A valve that will not close makes every repair harder and is worth replacing at the same visit.
Any crust or corrosion on the faucet or its connections?
Mineral crust points to hard water and a clogged aerator. Green or blue corrosion points to a slow leak at a connection.
Anything else going on?
These are what turn a faucet call into a plumbing call.
| What you told us | Points |
|---|
Get on the schedule
Your answers go to the shop with the booking, so whoever takes it already knows what you are looking at. You pick the arrival window, from the windows the schedule actually has open.
Everything is required unless it says optional.
Pick a window
Loading the shop's open windows…

Water you cannot stop
Turn the shutoff valve under the sink clockwise. If it does not close, turn the water off at the main, at the meter by the street.
Black Ops